Mauch Sensor Hub HEX X2 HS Series Power Module For Pixhawk


$45.00

Add to Cart:


  • Description
  • Details
  • Reviews
MAUCH 080 : Sensor Hub X2 / PIXHAWK
This sensor hub is to connect two current sensors in parallel.
The current of both sensors will be summarized and passed to the FC.
The voltage measurement of the Lipo packs will be collected from
both sensors and passed through the Hub to the FC.
The main purpose of this hub is to replace existing protection circuits
( like an idealdiode ) and to monitor, that both paralleled Lipo's supply
the same current to the system. Since we monitor the current of both
batteries, we will find out very early when a Lipo starts to fail ?
before it is too late. If the difference in current is bigger
than + / -10%, the Hub will issue a warning to the pilot via a
Power Led and / or buzzer ( fast flashing ) connected to the Alarm
I / O. If the difference in current is larger than + / -20%, the
Alarm output will be always ON to indicate the fault? the pilot
should immediately land and check the batteries.
Additionally, there is a reserve relay contact ( alarm ) for the user
to implement any desired function.
The I2C bus is for future integration.
Product Details
To set up a complete system you would need:
1x Sensor Hub X2
2x Current sensor board:
HS-050-LV or HV = 2x50A = 0-100A Tota
HS-100-LV or HV = 2x100A = 0-200A Total
HS-200-LV or HV = 2x200A = 0-400A Total
1x 2-6S BEC or 4-16S HYB-BEC
39mm x 31mm x 6mm / 7g without cables.
The board comes with 10cm connection cable
(DF-13-6p < - > DF-13-6p) to the FC and 2x 10cm
connection cables (DF-13-6p < - > DF-13-4P) to the sensor boards.
If you need a customized cables in different length,
then please order it separately.
MAUCH080
HEX Mauch Sensor Hub X2 HS Series Power Module For Pixhawk2 PIX Flight Control RC Drone Parts
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

This product was added to our catalog on Monday 24 January, 2022.

Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here