Home WHolesale Kelly ESC KLS964024V-91-8080H 24V-96V 400A SINUSOIDAL BLDC MOTOR

Kelly ESC KLS964024V-91-8080H 24V-96V 400A SINUSOIDAL BLDC MOTOR

$799.99

Add to Cart:

Description
Details
Reviews

Features
Kelly Controller KLS96401-8080H 24V-96V 400A SINUSOIDAL BLDC MOTOR CONTROLLER WITH CAN-BUS
KLS controller is supposed to reduce the noise of BLDC motor,especially for hub motor.
The BLDC motor must be based on 3 hall sensors.Customers can program the KLS controller
on PC software or Android App.You may need a Z-TEK USB to RS232 cable for programming
the controller if you want to program the controller on Android Tablet.
Product Details
Key Features: Matching Motor type: BLDC Motor with Hall sensor
Support for BLDC outrunner PM154120 motor, PM20280 motor, PM23850 motor , PM238100 motor
Voltage range: 24V-96V
Support Programmable with various functions
Application: Suitable for electric motorcycle or electric car with high power BLDC Motor
Support Multi-Regenerative Functions:
1. Regen when Braking
2. Regen when taking off the Accelerator
3. Regen with a simulative Pedal
Supprots Broadcast CAN-BUS
1)Intelligence with powerful microprocessor.
2)Synchronous rectification, ultra low drop, fast SVPWM and FOC to achieve very high efficiency.
3)Electronic reversing.
4)Voltage monitoring on 3 motor phases, bus, and power supply.
5)Voltage monitoring on voltage source 12V and 5V.
6)Current sense on all 3 motor phases.
7)Current control loop.
8)Hardware over current protection.
9)Hardware over voltage protection.
10) Configurable limit for motor current and battery current.
11) Low EMC.
12) Battery protection: current cutback, warning and shutdown at configurable high and low battery voltage.
13) Rugged aluminum housing for maximum heat dissipation and harsh environment.
14) Rugged high current terminals, and rugged aviation connectors for small signal.
15) Thermal protection: current cut back, warning and shutdown on high temperature.
16) Configurable 60 degree or 120 degree hall position sensors.Controller can do auto_Identification
angle for different degrees of hall sensors.
17) Configurable high pedal protection: the controller will not work if high throttle is detected at power on.
18) Current multiplication: Take less current from battery, output more current to motor.
19) Easy installation: 3-wire potentiometer will work.
20) Standard PC/Laptop computer to do programming.There is one more choice for customers to program
KLS controller.Standard Tablet with Android OS to do programming.Need a Z-TEK USB TO RS232 cable for
connecting the controller to App program in Tablet.
21) User program provided. Easy to use. No cost to customers.
22) Support motors with any number of poles.
23) Up to 70,000 electric RPM standard. (Electric RPM = mechanical RPM * motor pole pairs;Motor pole pairs=Motor poles/2).
Specifications:
•Frequency of Operation: 20kHz.
•Standby Battery Current: < 0.5mA.
•5V or 12V Sensor Supply Current: 40mA.
•Controller supply voltage range: PWR, 24V to 96V for pin7 which can be connected from main battery pack B+,through a key switch.
•Supply Current, PWR, 30mA Typical.
•Configurable battery voltage range, B+. Max operating range: 18V to 1.25*Nominal Voltage.
•Standard Throttle Input: 0-5 Volts(3-wire resistive pot), 1-4 Volts(hall active throttle).
•Throttle Input: 0-5 Volts. Can use 3-wire pot to produce 0-5V signal.
•Main Contactor Coil Driver<2A.
•Full Power Operating Temperature Range: 0 degree to 70 degrees(MOSFET temperature).
•Operating Temperature Range: -40 degreesto 100 degrees (MOSFET temperature).
•Motor Current Limit, 30 seconds: 400A, depending on the model.
•Motor Current Limit, continuous: 180A, depending on the model.
•Max Battery Current :Configurable

Kelly Controller KLS96401-8080H 24V-96V 400A SINUSOIDAL BLDC MOTOR CONTROLLER WITH CAN-BUS