brushlessgimbal.ca

Categories


Chimera7 Pro 6S LR with Walksnail Avatar HD FPV Goggles controll


$1,527.99

Add to Cart:


  • Description
  • Details
  • Reviews
Features
Chimera7 Pro 6S LR with Walksnail Avatar HD FPV Goggles controller ELRS RTF
- Battery voltage LED status light (illuminated IF logo on the bottom)
- GoPro TPU bottom stand (GoPro protector not included)
- Lightweight Side Panels Design - Keep Your Rig Clean
- XING2 2809 1250KV efficient wide stator motors
- GPS pre-installed for more safety at a distance
- 6mm rigid arm design for more stiffness
- Top- and bottom battery mount option
Product Details
- Weight: 695g (without battery and GoPro mount)
- Total Dimensions: 258*200mm (body dimension)
- Upper(middle) Plate Thickness: 3mm
- Bottom to Top Distance: 20-29mm
- ESC: BLITZ E55 4-IN-1 2-6S ESC
- Camera Plate Thickness: 3mm
- Bottom Plate Thickness: 3mm
- Top Plate Thickness: 3mm
- Geometry: DC (DeadCat)
- HQ 7.5X3.7X3 Propellers
- Arm Thickness: 6mm
- XING2 2809 1250KV
- Wheelbase: 321mm
- FC: BLITZ F722
ELECTRONICS // BLITZ F7 Stack (F7 V1.1 + 55A 4in1 ESC):
FC //BLITZ F722 Flight Controller
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Smartaudio / IRC Tramp VTX protocol supported
Firmware target: IFLIGHT_BLITZ_F722
Motor outputs: 4x (SH1.0 connector)
Flash: 32MB (Blackbox flash)
I2C serial: SDA / SLA pads
Dimensions: 36.5*35 mm
Barometer: DPS310
OSD Chip: AT7456E
LED controller: Yes
MCU: STM32 F722
Beeper pad: Yes
Gyro: BMI270
Weight: 7.8g
UARTS: 6
ESC // BLITZ E55 4-IN-1 2-6S 55A ESC
Supports: DShot DShot150/300/600/MultiShot/ OneShot etc.
Mounting Holes: 30.5*30.5mm/F4mm
Target: IFLIGHT_BLITZ_G2
Supports 2-6S Lipo input
Current sensor: Yes
Constant: 55 Amps
Current rate: 200
Burst: 65 Amps
Weight: 15.3g
MCU: G071
BEC: No
Commando8 Specification:
ELRS module: ExpressLRS 915MHz or 2.4GHz (inbuilt in back of the radio)
- 915MHz system: SX1276
- 2.4GHz system: SX1280
BASE 2.4G Module:
- Supported Protocols: Futaba S-FHSS/Frsky D16/Frsky D8
- 2.4GHz system: CC2500
Antenna options:
- Dual-Band (915MHz+2.4GHz)
- Single-Band (915MHz)
- Single-Band (2.4GHz)
Control interface:
- 2x 2-position switches (can be used for arming; not momentary)
- 2x 5-axis menu buttons for full OpenTX or EdgeTX control
- 2x 3-position switches
RF Power:
- ExpressLRS 915MHz // Max Output 1000mW
- ExpressLRS 2.4GHz // Max Output 500mW
- Input: Mini High Precision Hall Gimbals with NMB bearings
- Battery: Built-in 4000mAh 1S2P 18650 Battery
- Charging: Type-C 20W Quick Charge
- Charging Connector: Type-C
- Radio Channels: 8
- Weight: 310g
Walksnail Avatar Digital HD FPV Goggles Specification:
OPTIC ENGINE
- Inter-Pupillary Distance (IPD): 57 ~ 70mm (adjustable)
- Adjustable Focus Range: +2 to -6 diopter
- Field of View (FOV): 46°
MICRO DISPLAYS
- Full HD 1080p OLED Dual Micro Displays
INPUT VOLTAGE
- 7-21V (2S-5S)
- Customizable Fit with Optional Faceplate Pad Accessories
- HD Video Output via USB-C Connector
- Supports Betaflight Canvas Mode
- Adjustable Anti-Fog Ventilation
- On/Off Power Button
- Integrated HD DVR
Chimera7 Pro HD BNF Included Components and Parts
4 x HQ 7.5X3.7X3 CW propeller + 4 x HQ 7.5X3.7X3 CCW (Color may vary)
1 x Commando 8 Radio Transmitter-ELRS (2.4G/915Mhz as optional)
2 x Albatross LHCP 5.8GHz SMA FPV Antenna
1 x Walksnail Avatar Digital HD FPV Goggles
2 x iFlight Lipo Strap 20*250mm (Black)
1 x Pre-built and Tested Chimera7 Pro
4x Crystal LHCP Short Omni Antennas
Chimera7 Pro 6S LR with Walksnail Avatar HD FPV Goggles controller ELRS RTF
  • 100 Units in Stock

Be the first to write a review.  Write a Review.

Product 14/92

 Previous 
 List 
 Next 

This product was added to our catalog on Friday 19 August, 2022.

Content

Custom Left Slide Out

You can add any content here, text, images, etc.



your alt text here