Product Description
Centerpiece HV Brushless Gimbal Controller.
This is the high-voltage Centerpiece, supporting input voltage up to 42v (10S) and supplied with two Spectar IMUs.
Specifications
▪ Supports high voltage, high current applications
▪ Completely auto tuning
▪ Dual/Triple processor architecture
▪ Robust CANBUS connectivity
▪ Accurate battery voltage compensation
Connectivity
▪ Bluetooth
▪ Futaba SBUS
▪ 4x PWM in/out + 4x PWM out
▪ Dual Spektrum satellites
▪ Dual IMU ports
▪ Phobotic expansion connector
Ratings
▪ Input voltage: 2S – 10S
▪ Current: up to 4A per motor
Dimensions
Outer dimensions: 69×63.5 (mm)
FYI Note that the PWM connector blocks protrudes another 8mm to the side
Mounting holes: 4 holes, 45×45 (mm) spacing, M3 bores
Spectar IMU outer dimensions: 23×23 (mm) square
Spectar IMU mounting holes: 4 holes, 18x18mm spacing, M2.5 bores
In the box
1x Centerpiece HV controller
2x Spectar IMU
2x Spectar IMU mounting hardware
2x IMU cable (please specify 30cm, 45cm or 60cm in checkout for both cables)
Video right after the gimbal calibration by “autotune”:
WEIGHT 0.25 kg
DIMENSIONS 15 x 10 x 10 cm
BACKORDER
Delivery time 2-3 days on item backorder
Centerpiece manual (Last updated: Mar. 23rd, 2015)
https://phobotic.com/manual/
Centerpiece firmware v1334 (Last updated: Apr. 1st, 2015)
Older versions: v1333 v1330 v1328
https://phobotic.com/static/fw/centerpiece/1334/centerpiece_fw.bin
Install PC software (Google Chrome application)
https://phobotic.com/downloads/#