Home Auto Pilot Flight Controller MATEK Mateksys Flight Controller H743-MINI V3 FC Built in OSD

MATEK Mateksys Flight Controller H743-MINI V3 FC Built in OSD

$85.00

Add to Cart:

Description
Details
Reviews

Features
MATEK Mateksys Flight Controller H743-MINI V3 FC Built 85
in OSD BEC Current Sensor Betaflight for RC FPV Drone
Product Details
FC Specifications
* MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
* Board V1.0 IMU: MPU6000 (SPI1) & ICM20602 (SPI4)
* Board V1.5 IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
* Board V3 IMU: ICM42688-P (SPI1) & ICM42605 (SPI4)
* Baro: Infineon DPS310 (I2C2)
* OSD: AT7456E (SPI2)
* Blackbox: MicroSD card socket (SDIO)
* 5.5x Uarts (1,2,4,6,7, Rx8)
* 11x PWM outputs
* 2x I2C (I2C1/DA1 CL1 pads, no I2C2 breakout)
* 1x CAN (C-H, C-L pads)
* 5x ADC (VBAT, Current, RSSI, VB2, CU2)
* 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
* 1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
* Dual Camera Inputs switch
* 8V power ON/OFF switch
Power
* Vbat Input: 6.3~36V (2~8S LiPo)
* BEC: 5V 1.5A cont. (Max.2A)
* BEC: 8V 1.5A cont. (Max.2A),
8V outputs stable when Vbat>=10V, 8V outputs 80% of Vbat when Vbat< 10V
* LDO 3.3V: 200mA
* VB2 pad supports Max. 69V (voltage divider 1K:20K)
* Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
FC Firmware
* ArduPilot(ChiBiOS): MATEKH743
* BetaFlight: MATEKH743
* INAV: MATEKH743
Physical
* Mounting
20 x 20mm/Φ3mm with Silicon Grommets
20 x 20mm/Φ2mm with Silicon & Brass Grommets
* Dimensions: 36 x 28 x 6.5mm
* Weight: 7g
MATEK Mateksys Flight Controller H743-MINI V3 FC Built in OSD BEC Current Sensor

MATEK Mateksys Flight Controller H743-MINI V3 FC Built in OSD BEC Current Sensor