Home Auto Pilot Flight Controller Holybro Kakute H7 V1.3 Flight Controller BlueTooth Barometer OSD

Holybro Kakute H7 V1.3 Flight Controller BlueTooth Barometer OSD

$119.99

Add to Cart:

Description
Details
Reviews

Features
The Holybro Kakute H7 v1.3 Flight Controller is full of features
including integrated Bluetooth, dual plug-and-play 4in1 ESC ports,
HD camera plug, barometer, OSD, 6x UARTs, full Blackbox MicroSD
card slot, 5V and 9V/3A BEC, easy soldering layout and much more.

The Kakute H7 builds upon the best features of its F7 predecessor
and further improves on hardware components and layout. With the
onboard Bluetooth chip (optional), you can perform Betaflight
configuration and tuning wirelessly on your phone with the SpeedyBee
Android & IOS App. The Kakute H7 is DJI HD ready. It has an easy
plug-and-play port with an on-board 9V regulator designed to power
your HD video transmitter like DJI/Caddx FPV Air Unit & Caddx
Vista while supporting analog system.

It has 6x dedicated UART ports with built-in inversion for peripherals
(UART2 is used for Bluetooth telemetry), along with a full MicroSD
Card slot for virtually unlimited Blackbox data logging.
Dual plug-and-play 4in1 ESC connectors, allowing easy plug-and-play
support for x8 Octocopter configuration and keeping it simple and clean.
The integrated BetaFlight OSD makes it easy to display important
information on your FPV display like battery voltage, flight time,
warnings, RSSI, smart audio features and more. It is also ready for
autonomous flight with the on-board barometer. There are LED & buzzer
pad, I2C pad (SDA & SCL) for external GPS/Magnetometers
Product Details
Kakute H7 V1.3 Specification :
MCU - STM32H743 32-bit processor running at 480 MHz
Professional underfill epoxy for mechanical reinforcement
IMU - MPU6000
Barometer - BMP280
OSD - AT7456E
Onboard Bluetooth chip - ESP32-C3 (Optional)
SpeedyBee IOS & Android App Compatible
Note: The Bluetooth onboard is set to automatically turn off when
the flight controller is unlocked (arm) and turn on automatically
when the flight controller is locked (disarm) in Betaflight
6x UARTs (1,2,3,4,6,7; UART2 is used for Bluetooth telemetry)
9x PWM Outputs (8 Motor Output, 1 LED)
2x JST-SH1.0 8pin ESC port (4in1 ESCs, x8/Octocopter compatible)
1x JST-SH1.0 6pin VTX port (For HD System like Caddx Vista & Air Unit)
Battery input voltage: 3S - 8S
BEC 5V 2A Cont.
BEC 9V 3A Cont
USB Type-C
Mounting - 30.5 x 30.5mm/Φ4mm hole with Φ3mm Grommets
Dimension - 35x35mm
Weight - 8g
Firmware Targets
BetaFlight: KakuteH7 (v4.2.11 & newer)
INAV: KakuteH7 (4.0.0 & newer) SD card support added in 4.1.0.
ArduPilot: KakuteH7 (4.2.0 & newer)
PX4: KakuteH7 (PX4 v1.13 or newer)
Package Includes:
1x Kakute H7 V1.3 Flight Controller
4x M3 Silicon Grommets
2x JST-SH1.0_8pin 150mm Cable (For ESCs)
2x JST-SH1.0_6pin 80mm & 150mm Cable (For DJI Air Unit)
1x JST-SH1.0_6pin Colored Silicon 150mm Cable (For Caddx HD System and other VTX)
Kakute_H7_V1_3
holybro Kakute H7 V1.3. USB-C, 9V 3A BEC for VTX, and JST-SH Onboard Bluetooth chip - ESP32-C3

holybro Kakute H7 V1.3. USB-C, 9V 3A BEC for VTX, and JST-SH Onboard Bluetooth chip - ESP32-C3