Home Auto Pilot Flight Controller F405 SpeedyBee WING APP FC board ICM42688P Flight Controller

F405 SpeedyBee WING APP FC board ICM42688P Flight Controller

$62.00

Add to Cart:

Description
Details
Reviews

Features
SpeedyBee F405 WING APP FC board ICM42688P Flight
Controller for RC Fixed Wing Model Airplane
Product Details
Product Name：SpeedyBee F405 WING FC board
MCU：STM32F405,168MHz,1MB Flash
IMU(Gyro&Accelerometer)：ICM-42688-P
Barometer：SPL006-001
OSD Chip：AT7456E
Blackbox：MicroSD Card Slot
UART：6 sets(USART1, USART2, USART3, UART4, UART5, UART6
(Dedicated for Wireless board Telemetry connection))
I2C：1x Used for magnetometer, digital airspeed sensor
ADC：4x (VBAT, Current, RSSI, Analog AirSpeed)
PWM：12x (11+1“LED”pad)
ELRS/CRSF receiver：Supported,connected to UART1
SBUS：Built in inverter for SBUS input (UART2-RX)
LED 3x LEDs for FC STATUS (Blue, Green)
and 3.3V indicator(Red) 1x RGB
RSSI：Supported,Named as RS .
Supported FC Firmware：INAV:SpeedyBeeF405WING
(default) ArduPilot: SpeedyBee F405WING
Product Name：SpeedyBee F405 WING PDB board
Input voltage range：7~36V (2~6S LiPo)
Battery Voltage Sensor：Connect to FC board VBAT, 1K:10K
(Scale 1100 in iNav, BATT_VOLT_MULT 11.0 in ArduPilot)
Battery Current Sensor：90A continuous, 215A peak Connect
to FC board Current (Scale 195 in iNav, 50 A/V in ArduPilot)
TVS Protective diode：Yes
FC BEC output：Output 5.2V +/- 0.1V DC Continuous current 2.4
Amps, 3A Peak Designed for FC, Receiver, GPS module,
AirSpeed module, Telemetry module, WS2812 LED_Strip
VTX BEC output：Output 9V +/- 0.1V DC Continuous current
1.8 Amps, 2.3A Peak Voltage adjustable, 9V Default, 12V or
5V via jumper Designed for Analog Video Transmitter,
Digital Video Transmitter, Camera.
Servo BEC output：Output 4.9V +/- 0.1V DC Continuous current
4.5 Amps, 5.5A Peak Voltage adjustable, 4.9V Default,
6V or 7.2V via jumper Designed for Servos.
Product Name：SpeedyBee F405 WING Wireless board
Wireless Configuration (long press BOOT button for 6 seconds
to switch modes)：BLE mode, connect to Speedybee APP； Wi-Fi mode,
connect to QGroundControl APP, Speedybee APP, MissionPlanner,
etc. ；Classic Bluetooth SPP mode, connect to
QGroundControl APP, MissionPlanner
LED strip controller (short press BOOT button to switch effects,
long press 2 seconds to switch modes)：4x WS2812 LED strip connectors,
adjustable colors and flashing modes；Max 5.2V 1.3A,
supports around 70pcs 5050 WS2812 LED beads
On-board battery level indicator：4x RGB indicator
LED for battery level display by number of lights
SP-F405-WING
SpeedyBee F405 WING APP FC board ICM42688P Flight Controller for RC Fixed Wing Model Airplane