HEADING_CONTACT_US_POPUP_TITLE

HEADING_CONTACT_US_POPUP_SUBTITLE

DJI A2MULTI-ROTOR STABILIZATION CONTROLLER
  • DJI A2MULTI-ROTOR STABILIZATION CONTROLLER

DJI A2MULTI-ROTOR STABILIZATION CONTROLLER

Price:

$1,499.00

Qty:

Product Description

Features
DJI A2 multi-rotor stabilization controller is a complete flight control system for various multi-rotor platforms, for commercial and industrial AP applications. It opens an unprecedented era of precise positioning and perfect flight control in harsh environments for flight control systems.
Its high performance antenna, low noise anti-interference front-end RF design, accurate position and speed calculating, represent comprehensive technological breakthroughs. These combined features make the positioning performance of the GPS Pro near perfection; With higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even in high vibration and large movement environments. The built-in receiver system directly supports the popular transmitters, and it also supports a variety of external receivers. Combined with abundant output interfaces and flexible configuration, it makes the flight controller competent for complex control and airborne equipment operation; the new dual CAN-Bus design greatly improves the data throughput and stability of the system.
Based on the technology and design philosophy of DJI’s Ace series of high-performance controllers, the A2 offers you a brand new flight experience. The A2 adopts a full metal case design and utilizes high quality components precisely calibrated with temperature compensation in all gyros and sensors, industry renowned flight algorithm in flight control and UAV field.
The GPS receiver of the A2 GPS-Compass Pro Module is equipped with a new high gain and high performance right-handed circular polarized (RHCP) antenna, the low noise anti-interference front-end RF design and the optimized localization algorithm, which provides the GPS Pro with stronger anti-interference performance, a stronger ability to capture satellite signals and a more accurate position hold calculating ability. All these features have enhanced its position locking capability.
The interior sensor of the A2 IMU has been upgraded comprehensively, and with higher accuracy performance, larger measuring range, and a unique damping design and calibration algorithm, the IMU is able to provide stable output even with high vibration and a large movement environment. The advanced sensor temperature compensation algorithm and industrialized accurate calibration algorithm gives the IMU excellent performance. With the DJI innovative damping structure and material, it is unnecessary to install a framework or cushioning, you can simply stick it on the aircraft. Small size and weight allow easy installation in a tight space, it simplifies the installation process, for various aircraft sizes.
The A2 has a built-in 2.4Ghz Radio technology DESST receiver system (the newest DJI Enhanced Spread Spectrum Technology), which supports the Futaba FASST series of transmitters. It can support 16 channels. Futaba transmitter users can use the system without any external receiver, which has greatly simplified the complexity of the system and improved the security of the remote control system.
A2 system has two reserved JR and SPEKTRUM satellite receiver ports, which support JR and SPEKTRUM satellite receivers. It currently supports SPEKTRUM DX6I, DX8 transmitters, other JR or SPEKTRUM series will be supported in the future.
The system supports external receivers including the Futaba S-Bus receiver, PPM receiver.
The A2 system has a dual CAN-Bus design, which means that the system data throughput will be doubled and the extendibility is improved. At the same time, the important data and the non-critical data are assigned respectively on different CAN-Bus ports, which greatly improves the system stability.
The A2 is equipped with a minimum of twelve output channels, users can easily use it to control an Oct-rotor, and the other four channels can be used as a general output interface, for example, to control the DJI retractable landing gear on S800 EVO, to control Gimbal or camera switch, etc.
PERIPHERALSupported Multi-rotorSupported ESC outputSupported Transmitter for Built-in ReceiverExternal Receiver Supported
Quad-Rotor: +4,x4;
Hex-Rotor +6,x6,Y6,Rev Y6;
Octo-Rotor +8,x8,V8		400Hz refresh frequencyFutaba FASST Series and DJI DESST SeriesFutaba S-Bus, S-Bus2, DSM2
Recommended BatteryOperating TemperatureAssistant Software System RequirementOther DJI Products Supported
2S ~ 6S LiPo-5°C to +60°CWindows XP SP3 / 7 /8 (32 or 64 bit)Z15,H3-2D,iOSD,2.4G Data Link,S800 EVO
FLIGHT PERFORMANCEHovering Accuracy(In GPS Mode)Maximum Wind ResistanceMax Yaw Angular VelocityMax Tilt Angle
Vertical: ± 0.5m
Horizontal: ± 1.5m		< 8m/s (17.9mph/28.8km/h)150 deg/s35°
Ascent/Descent
±6m/s
ELECTRICAL & MECHANICALPower ConsumptionBuilt-In FunctionsTotal WeightDimensions
MAX 5W (Typical Value: 0.3A@12.5V）Built-in Receiver
Multiple Control Modes
2-axis Gimbal Supported
Low Voltage Protection
PC & Bluetooth Ground Station
External Receiver Supported
Intelligent Orientation Control
Sound Alarm
4 Configurable Output
Total Weight: <= 224g(overall)Flight Controller: 54mm x 39mm x 14.9mm
IMU: 41.3mm x 30.5mm x 26.3mm
GPS-Compass Pro: 62mm (diameter) x 14.3mm
LED-BTU-I: 30mm x 30mm x 7.9mm
PMU: 39.5mm x 27.6mm x 9.8mm

Features

  • 50 Units in Stock

Reviews

Be the first to write a review. Write a Review

Product 37/184

 Previous 
 Return to the Product List 
 Next 

This product was added to our catalog on Tuesday 10 September, 2013.